These should be replaced atleast once a year to keep your tool in tip top shape and ensure you are getting the full power from your tool.
$26.00
Paslode Degreaser Cleaner
Paslode Cleaner Degreaser designed for use with Impulse and Pneumatic tools removes grease, oil, dirt, carbon, acid and wax deposits. Leaves no residue and does not damage plastic or electrical components in tool body. Protects against damage to O-Rings and rubber seals increasing tool performance and reliability. Each 350g can lasts for up to three tool cleaning procedures (depending on how dirty the tool is).
Designed specifically for use with Paslode Impulse and Pneumatic tools
Removes grease, oil, dirt, carbon, acid and wax deposits
Leaves no residue
Safe to use on plastic and electrical components in tool body
Protects against damage to O-Rings and rubber seals increasing tool performance and reliability
**You will need Paslode Oil to re-lube your tool after**
$26.00
Paslode Oil
Paslode tooling oil is especially designed for use with Paslode nail driving tools. Formulated to ensure viscosity meets the tolerances for precision tool combustion and heat resistance Impluse oil also enhance tool longevity by minimising carbon deposits in the firing chamber.
$39.00
Paslode Framing Lower Probe
Paslode lower probe, fits all framemaster tools with the quick adjust cage.
$13.20
Paslode Probe Release Buttons
Paslode lower probe release buttons only. (A Pair)
Note: The metal cage is NOT included - this is for the Orange Buttons only.
$44.00
Brad Gun Yoke Springs
Fits all brad guns. (comes as a pair)
$162.50
Driver For Brad Gun
For all Paslode Brad Nailers
$50.90
BRAD GUN KNOB WITH YOKE GUIDE ASSEMBLY ( WITH ROLL PIN )
$22.00
Paslode Brad Gun Yoke
Fits all brad guns.
$10.50
Brad Gun Feed Spring
Paslode Brad Gun feed spring.
$185.00
NiCD Brad Gun Spark Unit
For all NiCD Paslode Brad Nailers
(excluding the very old straight brad gun)
$165.00
Driver For Framing Gun
For all Paslode Framing Nailers
$45.10
Bumper for Framing Gun
Fits Nicad and LI-ION gun.
$120.00
Li-Ion Framing Gun Circuitboard
For all Li-ion Paslode Framing Nailers
$148.50
Li-Ion Framing Gun Spark Unit
For all Li-ion Paslode Framing Nailers
$69.00
Li-Ion Brad Gun Circuitboard
For all Li-ion Paslode Brad Nailers
$179.00
Li-Ion Brad Gun Spark Unit
For all Li-ion Paslode Brad Nailers.
$55.50
Muffler, Disc Filter & Reed Valve
For all Brad Guns
*THE MOST CRITICAL THING TO CHANGE IN A SERVICE*
$99.00
NiCD Framing Gun Circuitboard
For all NiCD Paslode Framing Nailers
$180.00
NiCD Framing Gun Spark Unit
For all NiCD Paslode Framing Nailers
(Excludes the Black Model Framing Gun)
$285.00
Li-Ion PowerVent Framing Sleeve
For all Paslode Framing Nailers.
This will convert your old tool to a new Power Vent system. Use with Paslode Power Plus Gas, and you can get 15% more punching power.
$52.50
Paslode Feed Spring & Follower
Paslode Framing Gun feed spring & follower.
$28.00
Actuator Assembly
For older Paslode Framing Nailers - NICAD, push rod model.
$40.00
Actuator Assembly - Brad Gun
Fits MK1 Angle and Straight Brad gun.
$28.00
Brad Gun Fan Blade
Paslode brad gun Fan Blade with grub screw.
$20.00
Brad Gun Spark Plug
Paslode brad gun spark plug.
$130.00
Li-Ion Framing Gun Fan Motor
For Li-ion Paslode Framing Nailers.
(Does not fit the Powervent Gun)
$26.50
Framing Gun Fan Blade
Paslode framing gun Fan Blade with grub screw.
$24.00
Framing Gun Spark Plug
Paslode Framing Gun Spark Plug.
$142.00
All Brad Gun, Fan Motor
For all Paslode Brad Nailers
$165.00
NiCD Framing Gun Fan Motor
For all NiCD Paslode Framing Nailers
*Please note: you may need a fan motor circuit board also, if your tool is very old.*
$142.00
Li-Ion Powervent Framing
Gun Fan Motor
For all Li-ion Powervent Paslode Framing Nailers
$19.00
Push Rods for Framing Gun
For older Paslode Framing Nailers (sold as a pair)
$7.00
Red Fuel Stem
For Paslode Framing Nailers
$6.60
Yellow Fuel Stem
For Paslode Brad Nailers
$20.50
Fuel Tube + Block
For Paslode Framing Nailers
$16.00
Paslode Case Clips
The black locking clips for the Paslode Carry Case.
Sold as a pair.
$16.00
PV Paslode Case Clips
The black locking clips for the Paslode Power Vent Carry Case.
Sold as a pair.
Please note: These are for the brand new Power Vent Case.
$26.50
Paslode No Mar Tips
The orange Non Marking Tips.
Fits Nicad Straight & Angled Brad gun.
Also fits the Li-ion Straight Brad gun.
Sold as a pack of 3.
$28.50
Paslode No Mar Tips
Li-ion Angle Brad gun only
The orange Non Marking Tips.
Fits Li-ion Angled Brad gun only.
Sold as a pack of 3.
$33.50
NiCAD Brad Gun Lower Probe
Paslode brad gun lower probe, for both straight and angle NICAD Battery Models.
$33.50
Li-Ion Angle Brad Lower Probe
Paslode brad gun lower probe, for Li-Ion Angle Brad Model only.
$37.50
Li-Ion Straight Brad
Lower Probe
Paslode brad gun lower probe, for Li-Ion Straight Brad Model only.
$35.50
2022 Angle Brad Lower Probe
Paslode brad gun lower probe, for the new 2022 Li-Ion Angle Brad Model only.
